TS-2000-HO GEZE door closer (40-80KG)
Product information
Pros and cons
Closing speed can be adjusted as desired.
This door closer has a hold-open mechanism in the scissor arm, which allows you to easily leave the door open at a selectable angle.
The closing force can be adjusted after installation (EN2-EN4) without having to move the closer.
This door closer has a hydraulic final action, which accelerates the door just before the closed status.
This door closer has a serrated shaft, which makes it possible to position the arm on the door closer at any desired angle.
This door closer therefore offers extra flexibility in difficult situations.
This door closer has fewer adjustment options and less power than its big brother, the TS 4000.
This door closer is quite expensive
Description
The TS 2000-HO door closer from GEZE needs no introduction.
GEZE brand door closers meet the highest usage and quality requirements.
This door closer has an adjustable closing force on the side from EN2-EN4 (40-80KG)
Naturally, this door closer complies with all fire brigade and safety standards required by the fire brigade in EN1154.
Setting options
The closing force of this door closer can be adjusted from the side using an Allen key.
This door closer has a hydraulic final action, which accelerates the door just before the closed status.
The closing delay can be fully adjusted to your preference at the front.
This door closer has an adjustable closing speed and latching action. This means that you can set the closing speed of the first 150 degrees as desired and the last 30 degrees latching action independently of each other.
Hold open function
This door closer has a hold-open function in the scissor arm. You can set the angle at which the door remains in the hold-open position. With a simple push you can take the door closer out of the hold-open position and close it again.
You can also activate and deactivate the hold-open function using a button in the scissor arm.
Assembly
This door closer is suitable for left and right-turning doors.
Door leaf mounting: door closer on the door, arm on the frame, you pull the door open towards you.
Frame mounting: door closer on the frame, arm on the door, you push the door away from you when opening it.
In the box
Door closer
Scissor arm
Screws and mounting material
Manual
Protective cap for the axle
Front cover cap
Allen key
Setting advice
Tip: Open the door completely and close both adjusting screws of the door closer.
If you did it correctly, the door will now stay open and will not close again.
If you now slowly turn the correct screw a little, the door will slowly close.
This allows you to determine the closing speed.
If you did it right, the door should not close all the way now.
If you now slowly turn the other screw you can determine the speed at which the door closes.
This way you can adjust the entire closing speed to your own preference.
Technical Specifications
Specification Details | Details |
Design | Articulated arm / scissor arm |
Color | Silver |
Closing force | EN-2, EN3, EN 4 |
Direction of rotation | Left and Right rotation |
Brand | GEZE |
Variable start and end speed | yes |
Adjustable closing speeds | Yes |
Safety valve against damage | yes |
Door width | Up to 1100 mm |
Weight of your door | 40-80 KG |
Door leaf installation | On hinge side or pull side |
Mounting on frame | On non-hinge side or push side |
Application | semi-professional |
Hold open function | yes |
Maximum adjustable opening angle | no |
Force adjustable after mounting | yes, infinitely variable on the side |
Video's
Bekijk hieronder beschikbare videos over deze deurdranger.
Handleidingen
Voor meer informatie over de montage, download hieronder de handleiding.