TS-2000 GEZE door closer (40-80KG)

TS-2000 GEZE door closer (40-80KG)

Product information

Pros and cons

Closing speed can be adjusted as desired.

The closing force can be adjusted after installation (EN2-EN4) without having to move the closer.

This door closer has a hydraulic final action, which accelerates the door just before the closed status.

This door closer has a serrated shaft, which makes it possible to position the arm on the door closer at any desired angle.
This door closer therefore offers extra flexibility in difficult situations.

This door closer has fewer adjustment options and less power than its big brother, the TS 4000.

This door closer is quite expensive

Description
The TS 2000 door closer from GEZE needs no introduction.
GEZE brand door closers meet the highest usage and quality requirements.
This door closer has an adjustable closing force on the side from EN2-EN4 (40-80KG)
Naturally, this door closer complies with all fire brigade and safety standards.

Setting options
The closing force of this door closer can be adjusted from the side using an Allen key.
This door closer has a hydraulic final action, which accelerates the door just before the closed status.
The closing delay can be fully adjusted to your preference at the front.
This door closer has an adjustable closing speed and latching action. This means that you can set the closing speed of the first 150 degrees as desired and the last 30 degrees latching action independently of each other.

Assembly
This door closer is suitable for left and right-turning doors.

Door leaf mounting: door closer on the door, arm on the frame, you pull the door open towards you.



Frame mounting: door closer on the frame, arm on the door, you push the door away from you when opening it.



In the box
Door closer
Scissor arm
Screws and mounting material
Manual
Protective cap for the axle
Front cover cap
Allen key

Setting advice
Tip: Open the door completely and close both adjusting screws of the door closer.
If you did it correctly, the door will now stay open and will not close again.
If you now slowly turn the correct screw a little, the door will slowly close.
This allows you to determine the closing speed.
If you did it right, the door should not close all the way now.
If you now slowly turn the other screw you can determine the speed at which the door closes.
This way you can adjust the entire closing speed to your own preference.

Technical Specifications

Video's

Handleidingen